Cisco 7600 Series User Manual

2-10
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-08
Chapter 2 Overview: Cisco 7600 Series SIPs
Cisco 7600 SIP-600 Overview
Cisco 7600 SIP-600 Overview
The following sections describe the Cisco 7600 SIP-600 (Cisco part number 7600-SIP-600):
• Cisco 7600 SIP-600 Processor, page 2-10
• Cisco 7600 SIP-600 LEDs, page 2-10
• Cisco 7600 SIP-600 Physical Specifications, page 2-10
Cisco 7600 SIP-600 Processor
The processor on a Cisco 7600 SIP-600 is described in Table 2-10.
Cisco 7600 SIP-600 LEDs
The Cisco 7600 SIP-600 has one LED, as shown in Figure 2-8.
Figure 2-8 Cisco 7600 SIP-600 Faceplate
The Cisco 7600 SIP-600 LED is described in Table 2-11.
Cisco 7600 SIP-600 Physical Specifications
The Cisco 7600 SIP-600 physical specifications are shown in Table 2-12.
Table 2-10 Cisco 7600 SIP-600 Processor
Type Speed Description
CPU 400 megahertz (MHz) internal operating
frequency
Broadcom 1125 MIPS-based design
STATUS
2
0
3
1
SPA INTERFACE
PROCESSOR
7600-SIP-600
138127
Table 2-11 Cisco 7600 SIP-600 LED
LED Label Color State Meaning
STATUS Red On The SIP has encountered an error.
Green On The SIP is online.
Yellow On The SIP is loading.
— Off The SIP is powered off.

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13