Cisco 7600 Series - Page 7

Contents
vii
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-08
24-Port Channelized T1/E1 ATM CEoP SPA Overview 3-60
24-Port Channelized T1/E1 ATM CEoP SPA LEDs 3-61
24-Port Channelized T1/E1 ATM CEoP SPA Interface Specifications 3-61
24-Port Channelized T1/E1 ATM CEoP SPA Cables and Connectors 3-61
Cable Installation 3-62
SPA Cable Pinouts 3-62
RJ-45 Cable Pinouts 3-65
Patch Panel Cabling 3-65
24-Port Channelized T1/E1 ATM CEoP SPA Patch Panel 3-66
2-Port Channelized T3/E3 ATM CEoP SPA 3-66
2-Port Channelized T3/E3 ATM CEoP SPA LEDs 3-66
2-Port Channelized T3/E3 ATM CEoP SPA Interface Specifications 3-68
2-Port Channelized T3/E3 ATM CEoP SPA Cables and Connectors 3-68
CHAPTER 4 Preparing to Install a SIP or a Shared Port Adapter 4-1
Required Tools and Equipment 4-1
Safety Guidelines 4-1
Safety Warnings 4-2
Warning Definition 4-2
Electrical Equipment Guidelines 4-6
Telephone Wiring Guidelines 4-7
Preventing Electrostatic Discharge Damage 4-7
Laser/LED Safety 4-8
CHAPTER 5 Installing and Removing a SIP 5-1
Handling SIPs 5-1
Online Insertion and Removal 5-2
Preparing for Online Removal of a SIP or SSC 5-2
Deactivating a SIP or SSC 5-3
Reactivating a SIP or SSC 5-3
Verifying Deactivation and Activation of a SIP or SSC 5-3
Preparing for Online Removal of a SPA 5-4
Deactivating a SPA 5-4
Reactivating a SPA 5-5
Verifying Deactivation and Activation of a SPA 5-6
Deactivation and Activation Configuration Examples 5-6
Deactivation of a SIP Configuration Example 5-7
Activation of a SIP Configuration Example 5-7
Deactivation of a SPA Configuration Example 5-7