Paging Status
DescriptionParameter
Indicates Rx packets during a multicast paging.Multicast Rx Pkts
Indicates Tx packets during a multicast paging.Multicast Tx Pkts
TR-069 Status
DescriptionParameter
Indicates if TR-069 function is enabled or disabled.TR-069 Feature
Displays the inform time interval from CPE to ACS.Periodic Inform Time
Indicates the last inform time.Last Inform Time
Displays the success or the failure status.Last Transaction Status
Indicates the start and end time of the session.Last Session
Displays the key for reference checkpoint for
parameter set configured.
ParameterKey
PRT Status
DescriptionParameter
The location of initiation and status of generation of
the most recently initiated problem report.
Problem reports may be initiated from the phone LCD
user interface, from the phone administration web
page, or remotely. See Report All Phone Issues from
the Phone Web Page, on page 184 and Report a Phone
Problem Remotely, on page 185 for details.
XML tag in status.xml: PRT_Generation_Status
PRT Generation Status
The status of upload of the most recently initiated
problem report.
See Configure PRT Upload, on page 180 for
information on configuring an upload rule for problem
reports.
XML tag in status.xml: PRT_Upload_Status
PRT Upload Status
Custom CA Status
These fields display the status of provisioning using a custom Certificate Authority (CA).
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
217
Cisco IP Phone Troubleshooting
Paging Status
To Next Page
Loading...
Need help?
General
