Cisco 7821 Administration Guide

DescriptionParameter
Specifies the credentials to use for profile account
authentication. The available options are:
• Disabled: Disables the profile account feature.
When this feature is disabled, the Profile
account setup menu doesn't display on the phone
screen.
• Basic HTTP Authentication: The HTTP login
credentials are used to authenticate the profile
account.
• XSI Authentication: XSI login credentials or
XSI SIP credentials are used to authenticate the
profile account. The authentication credentials
depend on the XSI Authentication Type for the
phone:
• When the XSI Authentication Type for
the phone is set to Login Credentials, the
XSI login credentials are used.
• When the XSI Authentication Type for
the phone is set to SIP Credentials, the XSI
SIP credentials are used.
Default: Basic HTTP Authentication
Profile Authentication Type
Each profile rule informs the phone of a source from
which to obtain a profile (configuration file). During
every resync operation, the phone applies all the
profiles in sequence.
Default: /$PSN.xml
If you are applying AES-256-CBC encryption to the
configuration files, specify the encryption key with
the --key keyword as follows:
[--key <encryption key>]
You can enclose the encryption key in double-quotes
(") optionally.
Profile Rule
Profile Rule B
Profile Rule C
Profile Rule D
DHCP options, delimited by commas, used to retrieve
firmware and profiles.
Default: 66,160,159,150,60,43,125
DHCP Option To Use
DHCP options, delimited by commas, used to retrieve
firmware and profiles.
Default: 17,160,159
DHCPv6 Option To Use
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
247
Cisco IP Phone Troubleshooting
Configuration Profile

Cisco 7821 Specifications

General

Resolution	396 x 162 pixels
Lines	2
Speakerphone	Yes
Display	3.5-inch (89 mm) monochrome display
Ethernet Ports	2 x 10/100 Ethernet ports
Power	IEEE PoE Class 1
Headset Port	Yes
Protocols	SIP
Audio Codecs	G.711, G.722, G.729, iLBC
Weight	0.9 kg (1.98 lb)