DescriptionParameter
Specifies the user name for Line Key.
Default: $USER
Short Name
Specifies whether the incoming call appearance is
shared with other phones or it is private.
Share Call Appearance
Use to assign any of the following features or
functions to unused line keys on the phone:
• Busy Lamp Field
• Call Pickup
• Speed Dial
Extended Function
Miscellaneous Line Key Settings
DescriptionParameter
Specifies the shared call appearance line ID mapping.
If Vertical First is set, the second call makes the next
available line ID LED flash. If Horizontal first is set,
the second call will make the same LED flash on
which the first call is received. Also, the behavior is
same for both outgoing and incoming calls.
7811 Cisco IP Phone does not support Line
ID Mapping.
Note
Default: Horizontal First
Line ID Mapping
Enables the SCA Barge-In.
Default: No
SCA Barge-In Enable
If enabled, restricts to automatically pick up an
incoming call on a shared line when you take the
phone off-hook.
SCA Sticky Auto Line Seize
This parameter allows you to choose the number of
calls per line button. You can choose a value from 2
to 10.
Default: 2
Call Appearances Per Line
Supplementary Services
DescriptionParameter
Enable or disable three-way conference service.
Default: Yes
Conference Serv
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
267
Cisco IP Phone Troubleshooting
Miscellaneous Line Key Settings
To Next Page
Loading...
Need help?
General
