Cisco Unified Wireless IP Phone 7925G Series Deployment Guide 10
3
rd
party antennas are not supported, as there is no interoperability testing performed against 3
rd
party antennas including
Distributed Antenna Systems (DAS) and Leaky Coaxial Systems.
Please refer to the following URL for more info on Cisco Wireless LAN over Distributed Antenna Systems.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6973/positioning_statement_c07-565470.html
Note: The Cisco 1130, 1140 and 3502i series access points are to be mounted on the ceiling as they have omni-directional
antennas.
Phone Models and Localization
Phone Models
Cisco manufactures four Cisco Unified Wireless IP Phone 7925G models and one Cisco Unified Wireless IP Phone 7925G-EX
model.
The regulatory domain can be identified by navigating to Settings > Model Information > WLAN Regulatory Domain and
then referencing the Regulatory Domain number in the table below.
The Cisco Unified Wireless IP Phone 7925G-EX is configured like the Cisco Unified Wireless IP Phone 7925G –W model,
which requires an 802.11d enabled access point.
Use the following tables to identify specific phone versions that support these regulatory domains for use around the world:
7925G