Cisco Unified Wireless IP Phone 7925G Series Deployment Guide 64
Below are the commands to change the QBSS max threshold for each platform type.
Cisco Unified Wireless LAN Controller = “config advanced 802.11b 7920VSIEConfig call-admission-limit <value>”
Cisco Autonomous Access Point = “dot11 phone cac-thresh <value>”
Configuring Auto-Immune
It is recommended to disable the Auto-Immune feature on the Cisco Unified Wireless LAN Controller.
The Auto-Immune feature was introduced in the 4.2.176.0 release, which was enabled by default and non-configurable.
As of the 4.2.207.0, 5.2.193.0 and 6.0.182.0 releases this feature is disabled by default but can be enabled optionally.
To view the Auto-Immune configuration on the Cisco Unified Wireless LAN Controller, telnet or SSH to the controller and
enter the following command.
(Cisco Controller) >show wps summary
Auto-Immune
Auto-Immune.................................... Disabled
To Next Page
Loading...
