EasyManuals Logo

Cisco 7925G Series User Manual

Cisco 7925G Series
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Cisco Unified Wireless IP Phone 7925G Series Deployment Guide 60
Call Admission Control Settings
Enable Call Admission Control (TSPEC) for Voice and configure maximum bandwidth and reserved roaming bandwidth
percentages for either 5 or 2.4 GHz depending on which band is to be utilized.
Maximum bandwidth default setting for voice is 75% where 6% of that bandwidth is reserved for roaming clients.
Roaming clients are not limited to using the reserved roaming bandwidth, but is to reserve some bandwidth in case all other
bandwidth is utilized.
Will want to ensure load-based CAC is enabled, which is available in the 4.1 release for the Cisco Unified Wireless LAN
Controller, but not currently available on the autonomous access point platform.
Load-based CAC will account for non-TSPEC clients as well as other energy on the channel.
Enable Traffic Stream Metrics (TSM).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G Series and is the answer not in the manual?

Cisco 7925G Series Specifications

General IconGeneral
WirelessIEEE 802.11a/b/g
Headset Jack2.5 mm
BluetoothNo
Frequency Band2.4 GHz, 5 GHz
Display2.0 in. TFT color display, 176 x 220 pixels
BatteryLithium-ion
AudioG.711, G.729
SecurityWPA, WPA2
Voice CodecsG.711, G.729, G.722
Battery Life8 hours talk time
Operating Temperature32°F to 104°F (0°C to 40°C)
ComplianceFCC

Related product manuals