Cisco Unified Wireless IP Phone 7925G Series Deployment Guide 90
Default Export
If needing to deploy the Cisco Unified Wireless IP Phone 7925G Series with identical WLAN settings, then select the “Default
Export” method.
After selecting “Default Export” the utility will create a TFTP downloadable configuration file based on the common data
entered, which is exported to the application install path (C:\Program Files\Cisco Systems\7921BD).
A confirmation window will be displayed when the default TFTP downloadable config file has been exported successfully.
The default file will be in the format of “WLANDefault.xml”, which the phone does a TFTP get for when it powers on or
during re-provisioning.
Bulk Export
If needing to deploy the Cisco Unified Wireless IP Phone 7925G Series with unique 802.1x accounts utilizing EAP-FAST,
PEAP or LEAP, then select the “Bulk Export” method.
The common data entered plus a CSV containing the phone MAC address, username and password will be used to create the
template.
After selecting “Bulk Export”, a prompt to display the CSV file will be presented.
Up to 1000 entries are supported per CSV file.
The “userinfo.csv” file in the install path can be used as a template.
MAC,Username,Password
To Next Page
Loading...
Need help?
General
