EasyManuals Logo

Cisco 7925G Series User Manual

Cisco 7925G Series
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Cisco Unified Wireless IP Phone 7925G Series Deployment Guide 55
802.11 Network Settings
If using 5 GHz, ensure the 802.11a network status is set to enabled.
Set the beacon period to 100ms.
Ensure DTPC Support is enabled.
If using 802.11n capable access points, ensure ClientLink is enabled.
Configure 12 Mbps as the mandatory (basic) rate and 18 24 or 54 Mbps as supported (optional) rates.
36-54 Mbps can optionally be disabled, if there are not any applications that can benefit from those rates.
Enable CCX Location Measurement.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G Series and is the answer not in the manual?

Cisco 7925G Series Specifications

General IconGeneral
WirelessIEEE 802.11a/b/g
Headset Jack2.5 mm
BluetoothNo
Frequency Band2.4 GHz, 5 GHz
Display2.0 in. TFT color display, 176 x 220 pixels
BatteryLithium-ion
AudioG.711, G.729
SecurityWPA, WPA2
Voice CodecsG.711, G.729, G.722
Battery Life8 hours talk time
Operating Temperature32°F to 104°F (0°C to 40°C)
ComplianceFCC

Related product manuals