EasyManuals Logo

Cisco 7925G Series User Manual

Cisco 7925G Series
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
Cisco Unified Wireless IP Phone 7925G Series Deployment Guide 65
Client Exclusion Policy
Excessive 802.11-association failures.......... Enabled
Excessive 802.11-authentication failures....... Enabled
Excessive 802.1x-authentication................ Enabled
IP-theft....................................... Enabled
Excessive Web authentication failure........... Enabled
Signature Policy
Signature Processing........................... Enabled
To disable the Auto-Immune feature on the Cisco Unified Wireless LAN Controller, telnet or SSH to the controller and enter
the following command.
(Cisco Controller) >config wps auto-immune disable
Configuring the WLAN Controller EAP-Request and EAPOL-Key Timeouts
If using EAP, the EAP-Request Timeout on the Cisco Unified Wireless LAN Controller should be set to at least 20 seconds.
In later versions of Cisco Unified Wireless LAN Controller software, the default EAP-Request Timeout was changed from 2 to
30 seconds.
The default timeout on the Cisco ACS server is 20 seconds.
To view the EAP configuration on the Cisco Unified Wireless LAN Controller, telnet or SSH to the controller and enter the
following command.
(Cisco Controller) >show advanced eap
EAP-Identity-Request Timeout (seconds)........... 30
EAP-Identity-Request Max Retries................. 2
EAP Key-Index for Dynamic WEP.................... 0
EAP Max-Login Ignore Identity Response........... enable
EAP-Request Timeout (seconds).................... 30
EAP-Request Max Retries.......................... 2
EAPOL-Key Timeout (milliseconds)...................... 1000
EAPOL-Key Max Retries............................ 2
To change the EAP-Request Timeout on the Cisco Unified Wireless LAN Controller, telnet or SSH to the controller and enter
the following command.
(Cisco Controller) >config advanced eap request-timeout 30
As of 6.0.182.0 release, the EAPOL-Key Timeout is configurable in milliseconds, where in previous releases it was only
allowed to be configured in seconds.
It is recommended to set the EAPOL_Key timeout to 200 milliseconds.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G Series and is the answer not in the manual?

Cisco 7925G Series Specifications

General IconGeneral
WirelessIEEE 802.11a/b/g
Headset Jack2.5 mm
BluetoothNo
Frequency Band2.4 GHz, 5 GHz
Display2.0 in. TFT color display, 176 x 220 pixels
BatteryLithium-ion
AudioG.711, G.729
SecurityWPA, WPA2
Voice CodecsG.711, G.729, G.722
Battery Life8 hours talk time
Operating Temperature32°F to 104°F (0°C to 40°C)
ComplianceFCC

Related product manuals