Cisco Unified Wireless IP Phone 7925G Series Deployment Guide 106
Restoring Factory Defaults
The configuration can be cleared by using the factory default menu option on the phone.
The factory default option erases all user-defined entries in Network Profiles, Phone Settings, and Call History.
To erase the local configuration, follow these steps:
6. Choose Settings > Phone Settings.
7. Press “**2” on the keypad.
The phone briefly displays “Restore to Default?”
8. Press the “Yes” softkey to confirm or “No” to cancel.
The phone resets after selecting “Yes”.
Capturing a Screenshot of the Phone Display
The current display can be captured by browsing to http://x.x.x.x/CGI/Screenshot, where x.x.x.x is the IP address of the Cisco
Unified Wireless IP Phone 7925G Series. At the prompt enter the username and password for the account for which the phone
is associated to.
Healthcare Environments
This product is not a medical device and uses an unlicensed frequency band that is susceptible to interference from other
devices or equipment.
To Next Page
Loading...
Need help?
General
