Cisco 7925G Series User Manual

Cisco Unified Wireless IP Phone 7925G Series Deployment Guide 76
After selecting “Import Step”, browse to the signed user certificate and select “Import” to complete the process.
Once the certificate is installed successfully, a confirmation page will be displayed.
The CA chain should already be enabled in the authentication server’s certificate trust list.
The authentication server certificate must also be imported into the Cisco Unified Wireless IP Phone 7925G Series for both the
MIC and User Installed methods. If the authentication server certificate was signed by a Certificate Authority (CA) server, then
that DER encoded root certificate will need to be imported into the Cisco Unified Wireless IP Phone 7925G Series.
If the Cisco Unified Wireless IP Phone 7925G Series has not registered to a Cisco Unified Communications Manager yet, then
the date and time must be configured manually for the first time.

Cisco 7925G Series Specifications

General

Wireless	IEEE 802.11a/b/g
Headset Jack	2.5 mm
Bluetooth	No
Frequency Band	2.4 GHz, 5 GHz
Display	2.0 in. TFT color display, 176 x 220 pixels
Battery	Lithium-ion
Audio	G.711, G.729
Security	WPA, WPA2
Voice Codecs	G.711, G.729, G.722
Battery Life	8 hours talk time
Operating Temperature	32°F to 104°F (0°C to 40°C)
Compliance	FCC