Procedure
Step 1 Press Contacts .
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Select IM&P contacts.
Step 4 Select a directory.
Step 5 Select an entry.
The entry shows the status of your contact.
Step 6 (Optional) Press Detail to view the contact details and press Back to return to the contacts list.
Step 7 Press Call.
Change Your Presence State
Because the phone is always available, you need to set your presence manually on the phone.
Before you begin
You administrator enables the IM&P directory in the phone.
Procedure
Step 1 Press Contacts .
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Select IM&P contacts.
Step 4 Highlight a directory. For example, Favorite, Non-Group, All contacts, and so on.
Step 5 Press Presence.
Step 6 Select your presence from the list.
• Available—You can take a call.
• Away—You have stepped away from the phone for a short time.
• Do not disturb—You don't want to take a call.
• Offline—You are not available to take calls. Typically, you use this presence when you leave the phone
for long periods of time.
Page a Group of Phones (Multicast Paging)
Your administrator can configure your phone as a part of a paging group. In a paging group, your phone can
automatically answer pages from other Multiplatform phones in the phone system. Each paging group has a
unique number associated with it. Your administrator gives you the configured paging group numbers. When
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
52
Calls
Change Your Presence State
To Next Page
Loading...
Need help?
General
