EasyManuals Logo

Cisco 8961 Manual

Cisco 8961
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
1
Phone Screen
Shows information about your phone, including directory number (extension), call
information (for example caller ID, icons for an active call or call on hold) and
available softkeys.
2
Session buttons
Each corresponds with an active call function. Pressing the button takes the default
action:
- Active calls-Pressing the button takes the default action for an active call. For
example, pressing the button for a ringing call answers the call and pressing
the button on a held call resumes the call. Session information, such as caller
ID and call duration, appears on the phone screen next to the session button.
- Call functions-When a session button is not being used for an active call, it
can be used to initiate functions on the phone, as indicated by the adjacent
phone screen icons. For example, pressing the session button can display
missed calls, take the phone off hook, or dial your voice-messaging system
(with a voice mail icon).
Color LEDs reflect the call state. LEDs can flash (blink on and off rapidly), pulse
(alternately dim and brighten), or appear solid (glow without interruption)
- Flashing amber
Ringing call. Pressing this button answers the call
- Solid green
May be a connected call or an outgoing call that is not yet
connected. If the call is connected, pressing this button displays the call
details for the participants of a conference call. If the call is not yet
connected, pressing this button ends the call.
- Pulsing green
Held call. Pressing this button resumes the held call
- Solid red
Shared line in-use remotely.
- Pulsing red
Shared line call put on hold remotely. Pressing the button
resumes the held call.

Other manuals for Cisco 8961

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 8961 and is the answer not in the manual?

Cisco 8961 Specifications

General IconGeneral
Resolution640 x 480 pixels
Display5-inch TFT color display
Ethernet10/100/1000 Mbps
PowerIEEE 802.3af Power over Ethernet (PoE) Class 3
ConnectivityTwo-port Gigabit Ethernet switch
Buttons4 softkeys
USB PortYes, supports USB 2.0
Headset JackYes, dedicated headset port
SpeakerphoneFull-duplex speakerphone
Codec SupportG.711, G.722, G.729, iLBC
Security802.1X authentication, TLS, SRTP, HTTPS

Related product manuals