Chapter 8 Scenario: Site-to-Site VPN Configuration
Implementing the Site-to-Site Scenario
8-4
Cisco ASA 5550 Getting Started Guide
78-17644-01
Configuring the Security Appliance at the Local Site
Note The adaptive security appliance at the first site is referred to as Security
Appliance 1 from this point forward.
To configure the Security Appliance 1, perform the following steps:
Step 1 In the main ASDM window, choose the VPN Wizard option from the Wizards
drop-down menu. ASDM opens the first VPN Wizard screen.
To Next Page
Loading...
