Cisco ASR 5500 - Page 277

DescriptionCommandCLI Mode
Displays MPLS cross-connect
information. MPLS tunnel
cross-connects between interfaces
and Label-Switched Paths (LSPs)
connect two distant interface
circuits of the same type via MPLS
tunnels that use LSPs as the
conduit.
show mpls cross-connectExec Mode show Commands
Displays MPLS FEC-to-NHLFE
(FTN) table information.
show mpls ftn [ vrf vrf_name
Exec Mode show Commands
Displays contents of the MPLS
FTN table for a specified VRF.
show mpls ftn [ vrf vrf_name ]
Exec Mode show Commands
Displays MPLS Incoming Label
Map (ILM) table information.
show mpls ilmExec Mode show Commands
Displays the MPLS LDP
information.
show mpls ldpExec Mode show Commands
Displays MPLS Next-Hop Label
Forwarding Entry (NHLFE) table
information.
show mpls
nexthop-label-forwarding-entry
Exec Mode show Commands
ASR 5500 System Administration Guide, StarOS Release 21.5
251
BGP MPLS VPNs
VPN-Related CLI Commands