Cisco ASR 9000 Series

Configuring Modular QoS Congestion Avoidance on Cisco ASR 9000 Series Routers
How to Configure Modular QoS Congestion Avoidance on Cisco ASR 9000 Series Routers
QC-77
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
OL-23108-02
5. bandwidth {bandwidth [units] | percent value}
or
bandwidth remaining [percent value | ratio ratio-value]
6. shape average {percent percentage | value [units]}
7. exit
8. exit
9. interface type interface-path-id
10. service-policy {input | output} policy-map
11. end
or
commit
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters global configuration mode.
Step 2
policy-map policy-map-name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
policy1
Enters policy map configuration mode.
• Creates or modifies a policy map that can be attached to
one or more interfaces to specify a service policy.
Step 3
class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class1
Enters policy map class configuration mode.
• Specifies the name of the class whose policy you want
to create or change.
Step 4
random-detect {cos value | default |
discard-class
value | dscp value | exp value |
precedence
value | min-threshold [ units ]
max-threshold [ units ] }
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)#
random-detect default
Enables RED with default minimum and maximum
thresholds.