Cisco ASR 903 Installation Guide

12.4VMaximum output voltage
550 WMaximum power output
• A900-PWR1200-A—Provides 975 W output power for system 12 V power with the A903-FAN module.
As most of the system configurations using A900-RSP3C-400-S RSP modules require power exceeding
550 W, we recommend using the A900-PWR1200-A power supply with A900-RSP3C-400-S RSP
modules. See the figure below.
Figure 5: AC Power Supply (A900-PWR1200-A)
Table 4: AC Power Supply Specifications (A900-PWR1200-A)
A900-PWR1200-APart number
115VAC/ 230VACInput power specification
85/264 VACInput voltage
85 VACMinimum input voltage
264 VACMaximum input voltage
12VMinimum output voltage
12.4VMaximum output voltage
1200 WMaximum power output
Fan Tray
The fan tray has the following hardware features:
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
8
Overview
Fan Tray

Cisco ASR 903 Specifications

General

Form Factor	Modular
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% non-condensing
Redundancy	Yes, redundant power supplies and route processors
Operating System	Cisco IOS XE
Power Supply	AC or DC
Switching Capacity	240 Gbps
Operating Temperature	-40°C to 65°C (-40°F to 149°F)
MTBF	200, 000 hours
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, T1/E1