Cisco CATALYST 2960

Index
IN-16
Catalyst 2960 Switch Command Reference
78-16882-01
T
tar files, creating, listing, and extracting 2-8
TDR, running 2-499
Telnet, using to communicate to cluster switches 2-229
temperature information, displaying 2-286
templates, SDM 2-236
templates, system resources 2-236
test cable-diagnostics tdr command 2-499
traceroute mac command 2-500
traceroute mac ip command 2-503
trunking, VLAN mode 2-477
trunk mode 2-477
trunk ports 2-477
trunks, to non-DTP device 2-478
trusted boundary for QoS 2-197
trusted port states for QoS 2-197
type (boot loader) command A-23
U
UDLD
aggressive mode
2-507, 2-509
debug messages, display B-72
enable globally 2-507
enable per interface 2-509
error recovery timer 2-81
message timer 2-507
normal mode 2-507, 2-509
reset a shutdown interface 2-511
status 2-392
udld command 2-507
udld port command 2-509
udld reset command 2-511
unicast storm control 2-468
UniDirectional Link Detection
See UDLD
unknown multicast traffic, preventing
2-475
unknown unicast traffic, preventing 2-475
unset (boot loader) command A-24
upgrading
software images
2-5
monitoring status of 2-252
upgrading information
See release notes
UplinkFast, for STP
2-455
user EXEC mode 1-2
V
version (boot loader) command A-26
vlan (global configuration) command 2-512
vlan (VLAN configuration) command 2-517
VLAN configuration
rules
2-515, 2-519
saving 2-512, 2-521
VLAN configuration mode
commands
VLAN
2-517
VTP 2-535
description 1-4
entering 2-523
summary 1-2
vlan database command 2-523
VLAN ID range 2-512, 2-517
VLAN Query Protocol
See VQP
VLANs
adding
2-512
configuring 2-512, 2-517
debug messages, display
ISL
B-68
VLAN IOS file system error tests B-67
VLAN manager activity B-65
VTP B-70
displaying configurations 2-397
extended-range 2-512