Cisco CATALYST 2960

2-33
Catalyst 2960 Switch Command Reference
78-16882-01
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
clear ip dhcp snooping database
clear ip dhcp snooping database
Use the clear ip dhcp snooping database privileged EXEC command to clear the DHCP binding
database agent statistics.
clear ip dhcp snooping database statistics
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines When you enter the clear ip dhcp snooping database statistics command, the switch does not update
the entries in the binding database and in the binding file before clearing the statistics.
Examples This example shows how to clear the DHCP snooping binding database agent statistics:
Switch# clear ip dhcp snooping database statistics
You can verify that the statistics were cleared by entering the show ip dhcp snooping database
privileged EXEC command.
Related Commands
statistics Clear the DHCP snooping binding database agent statistics.
Release Modification
12.2(25)FX This command was introduced.
Command Description
ip dhcp snooping Enables DHCP snooping on a VLAN.
ip dhcp snooping database Configures the DHCP snooping binding database agent or
the binding file.
show ip dhcp snooping binding Displays the status of DHCP snooping database agent.