Cisco CATALYST 2960

B-17
Catalyst 2960 Switch Command Reference
78-16882-01
Appendix B Catalyst 2960 Switch Debug Commands
debug matm
debug matm
Use the debug matm privileged EXEC command to enable debugging of platform-independent MAC
address management. Use the no form of this command to disable debugging.
debug matm
no debug matm
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug matm command is the same as the no debug matm command.
Related Commands
Release Modification
12.2(25)FX This command was introduced.
Command Description
debug platform matm Displays information about platform-dependent MAC address management.
show debugging Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.