Cisco CATALYST 2960

2-293
Catalyst 2960 Switch Command Reference
78-16882-01
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
show etherchannel
show etherchannel
Use the show etherchannel user EXEC command to display EtherChannel information for a channel.
show etherchannel [channel-group-number {detail | port | port-channel | protocol | summary}]
{detail | load-balance | port | port-channel | protocol | summary} [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If you do not specify a channel-group, all channel groups are displayed.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
channel-group-number (Optional) Number of the channel group. The range is 1 to 6.
detail Display detailed EtherChannel information.
load-balance Display the load-balance or frame-distribution scheme among ports in the
port channel.
port Display EtherChannel port information.
port-channel Display port-channel information.
protocol Display the protocol that is being used in the EtherChannel.
summary Display a one-line summary per channel-group.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)FX This command was introduced.