Cisco CATALYST 2960

2-292
Catalyst 2960 Switch Command Reference
78-16882-01
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
show errdisable recovery
Interfaces that will be enabled at the next timeout:
Interface Errdisable reason Time left(sec)
--------- ----------------- --------------
Gi0/2 link-flap 279
Note Though visible in the output, the unicast-flood field is not valid.
Related Commands Command Description
errdisable recovery Configures the recover mechanism variables.
show errdisable detect Displays error-disabled detection status.
show errdisable flap-values Displays error condition recognition information.
show interfaces status Displays interface status or a list of interfaces in error-disabled state.