Cisco CATALYST 2960

C-2
Catalyst 2960 Switch Command Reference
78-16882-01
Appendix C Catalyst 2960 Switch Show Platform Commands
show platform acl
show platform acl
Use the show platform acl privileged EXEC command to display platform-dependent access control list
(ACL) manager information.
show platform acl {interface interface-id | label label-number [detail] | statistics asic-number |
usage asic-number [summary] | vlan vlan-id} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
interface interface-id Display per-interface ACL manager information for the specified interface.
The interface can be a physical interface or a VLAN.
label label-number
[detail]
Display per-label ACL manager information. The label-number range is 0 to
255. The keyword has this meaning:
• detail—(Optional) Display detailed ACL manager label information.
statistics asic-number Display per-ASIC ACL manager information. The asic-number is the port
ASIC number, either 0 or 1.
usage asic-number
[summary]
Display per-ASIC ACL usage information. The keyword has this meaning:
• summary—(Optional) Display usage information in a brief format.
vlan vlan-id Display per-VLAN ACL manager information. The vlan-id range is from 1 to
4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)FX This command was introduced.