Cisco Catalyst 9800-80 - CHAPTER 1 Overview; Summary of Cisco Catalyst 9800-80 Wireless Controller

CHAPTER 1
Overview
The Cisco Catalyst 9800-80 Wireless Controller is an 80-G wireless controller that occupies two rack unit
space and supports a single Ethernet Port Adapter (EPA) slot, and eight built-in 10-GE or 1-GE interfaces.
The Cisco Catalyst 9800-80 Wireless Controller portfolio comes with a 30-G Crypto processor that aggregates
services at scale.
• Summary of Cisco Catalyst 9800-80 Wireless Controller, on page 1
• Cisco Product Identification Standard, on page 7
• Serial Number and PID or VID Label Location, on page 9
Summary of Cisco Catalyst 9800-80 Wireless Controller
The Cisco Catalyst 9800-80 Wireless Controller supports:
• Up to 32 GB (16 GB in the base configuration) of DDR3 error-correcting code-protected field-replaceable
memory, with single-bit error correction and multi-bit error detection.
• A fixed forwarding processor with up to 100 Gbps sustained forwarding data traffic through the chassis.
• Up to 25 Gbps security and crypto processing through a dedicated security processor.
• RJ-45 console ports and a mini USB console port.
• 32 GB internal bootflash storage.
• One copper Ethernet 10/100/1000 Mbps network management port.
• An embedded USB (eUSB) flash module that supports 32 GB of nonvolatile Flash storage.
• Two USB 3.0 ports that are backward compatible with USB 2.0.
• SATA hard disk.
• Eight built-in 10 GE SFP+ interfaces.
The Te0/0/6 and Te0/0/7 ports support 10 GE and 1 GE SFP+ interfaces.
Note
• One Ethernet Port Adapter (EPA) bay.
Cisco Catalyst 9800-80 Wireless Controller Hardware Installation Guide
1