Cisco Catalyst 9800-80 User Manual

DescriptionPID
10GBASE-CU SFP+ Cable 7 Meter, activeSFP-H10GB-ACU7M
10GBASE-CU SFP+ Cable 10 Meter, activeSFP-H10GB-ACU10M
10GBASE DWDMDWDM-SFP10G-30.33 –DWDM-SFP10G-61.41
Supported Crypto Module
The Cisco Catalyst 9800-80 Wireless Controller supports the following crypto module:
DescriptionPID
A 32-core network processor running at 1400-MHz, which allows 30G of
Crypto performance.
Octeon-II CN6880-1400
Power Supplies
The Cisco Catalyst 9800-80 Wireless Controllers support AC or DC power supply options. The modular
chassis configurations support the installation of two power supplies for redundancy. When an external power
supply fails or is removed, the other power supply provides power requirements for the chassis. This allows
you to hot-swap the power supply without impacting the functionality of the controller.
A controller can support two AC or DC power supplies. Do not install mixed AC and DC power supply units
in the same chassis.
Caution
The power supplies are used in a 1 + 1 redundant configuration. There is no input switch on the faceplate of
the power supplies. A power supply is switched from Standby to On by way of a system chassis power switch.
The following table lists the power supplies that you can order:
Power SupplyPart Number
Cisco Catalyst 9800-80 Wireless Controller power supply module with plug-side intake
airflow, AC, 1100W, 85-264V
C9800-AC-1100W
Cisco Catalyst 9800-80 Wireless Controller power supply module with plug-side intake
airflow, AC, 1100W, 85-264V, spare
C9800-AC-1100W=
Cisco Catalyst 9800-80 Wireless Controller power supply module with plug-side intake
airflow, DC 950W
C9800-DC-950W
Cisco Catalyst 9800-80 Wireless Controller power supply module with plug-side intake
airflow, DC 950W, spare
C9800-DC-950W=
Cisco Catalyst 9800-80 Wireless Controller Hardware Installation Guide
15
Supported Hardware Components
Supported Crypto Module

Cisco Catalyst 9800-80 Specifications

General

Model	Cisco Catalyst 9800-80
Category	Controller
Product Type	Wireless LAN Controller
Form Factor	Rack-mountable
Rack Height	2U
Wireless Standards	802.11a/b/g/n/ac/ax
Maximum Number of Access Points	6000
Maximum Number of Wireless Clients	64000
Throughput	80 Gbps
High Availability	Yes
Redundant Power Supply	Yes
Operating Temperature	32 to 104°F (0 to 40°C)
Ports	8 x 10 Gigabit Ethernet (SFP+)
Redundancy	N+1
Management	Web UI, CLI
Power Supply	AC
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 - 95% (noncondensing)