Cisco Catalyst 9800-80 - Supported Transceivers

Supported Transceivers
The Cisco Catalyst 9800-80 Wireless Controller supports the following small form-factor pluggable (SFP)
and CPAK optical transceiver types:
Cisco Catalyst 9800-80 Wireless ControllerPortsBay
SFP+Ports TE0 – TE7 use 1GE or 10GE SFP+Bay
0
SFP
SFP+
EPA-18X1GE— Ports 0 – 17
EPA-10X10GE— Ports 0 – 9
EPA-1X40GE— Port 0
EPA-2X40GE— Port 0 – 1
EPA-1X100GE— Port 0
Bay
1
Table 5: Supported SFP Transceivers
DescriptionPID
1000BASE-BX SFP, 1490nmGLC-BX-D
1000BASE-BX SFP, 1310nmGLC-BX-U
1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm,
DOM
GLC-LH-SMD
1000BASE-SX SFP transceiver module, MMF, 850nm, DOMGLC-SX-MMD
1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOMGLC-ZX-SMD
1000BASE-T SFP transceiver module for category 5 copper wireGLC-TE
Table 6: Supported SFP+ Transceiver
DescriptionPID
10GBASE-SR SFP+ Module for MMFSFP-10G-SR
10GBASE-SR SFP+ Module for Extended Temp rangeSFP-10G-SR-X
10GBASE-LR SFP+ Module for SMFSFP-10G-LR
10GBASE-LRM SFP+SFP-10G-LRM
10GBASE-LR SFP+ Module for Extended Temp rangeSFP-10G-LR-X
10GBASE-ER SFP+ Module for SMFSFP-10G-ER
10GBASE-ZR SFP+SFP-10G-ZR
Cisco Catalyst 9800-80 Wireless Controller Hardware Installation Guide
14
Supported Hardware Components
Supported Transceivers