Cisco Catalyst 9800-80 - Serial Number and PID or VID Label Location

WLC# show diag chassis eeprom
MIDPLANE EEPROM data:
Product Identifier (PID) : C9800-80-K9
Version Identifier (VID) : V01
PCB Serial Number : xxxxxxxxxx
Top Assy. Part Number : 68-8888-68
Hardware Revision : 0.2
Asset ID :
CLEI Code : UNASSIGNED
Power/Fan Module P0 EEPROM data:
Product Identifier (PID) : C9800-AC-750W
Version Identifier (VID) : V01
PCB Serial Number : xxxxxxxxxx
Hardware Revision : 1.0
Asset ID :
CLEI Code : xxxxxxxxxx
Power/Fan Module P1 EEPROM data is not initialized
Common Language Equipment Identification (CLEI) code is a ten-digit character code that identifies a specific
product. A CLEI code is applied to each part within a Cisco Catalyst 9800-80 Wireless Controller as they are
programmed in manufacturing for shipment to customers.
Note
show license udi Command
The show license udi command displays UDI information.
The following is sample output from the show license udi command:
WLC# show license udi
SlotID PID SN UDI
--------------------------------------------------------------------------------
* C9800-80-K9 xxxxxxxxxx C9800-80-K9:xxxxxxxxxx
For complete information on the product identification standard, see https://www.cisco.com/c/en/us/products/
unique-device-identifier-udi.html.
Note
Serial Number and PID or VID Label Location
The following figures show the location of the serial number and the PID/VID label on the Cisco Catalyst
9800-80 Wireless Controller.
Cisco Catalyst 9800-80 Wireless Controller Hardware Installation Guide
9
Overview
Serial Number and PID or VID Label Location