Cisco Catalyst 9800-80 User Manual

Table 2: EPA LEDs
DescriptionColor or
State
Function
Port is enabled and the link is up.GreenA/L
(Active/Link)
Port is enabled and the link is down.Amber
Port is not enabled.Off
EPA is ready and operational.
GreenStatus
EPA power is on and good, and the EPA is being configured.Amber
EPA power is off.Off
Supported SFP Models
The following table lists the supported SFP models [40-GB and 100-GB] on the Cisco Catalyst 9800-80
Wireless Controller.
Table 3: SFP Model [40-GB]
DescriptionSFP Model
40-GB SFP model for SR4QSFP-40G-SR4
40-GB SFP model for LR4QSFP-40G-LR4
40-GE SFP model for LR4QSFP-40GE-LR4
40-GB SFP model for ER4QSFP-40G-ER4
40-GB SFP model for SR4-SQSFP-40G-SR4-S
40-GB SFP model for LR4-SQSFP-40G-LR4-S
40-GB SFP model for SR-BDQSFP-40G-SR-BD
40-GB SFP model for BD-RXQSFP-40G-BD-RX
Table 4: SFP Model [100-GB]
DescriptionSFP Model
100-GB SFP model for SR4-SQSFP-100G-SR4-S
100-GB SFP model for LR4-SQSFP-100G-LR4-S
Cisco Catalyst 9800-80 Wireless Controller Hardware Installation Guide
13
Supported Hardware Components
Supported SFP Models

Cisco Catalyst 9800-80 Specifications

General

Model	Cisco Catalyst 9800-80
Category	Controller
Product Type	Wireless LAN Controller
Form Factor	Rack-mountable
Rack Height	2U
Wireless Standards	802.11a/b/g/n/ac/ax
Maximum Number of Access Points	6000
Maximum Number of Wireless Clients	64000
Throughput	80 Gbps
High Availability	Yes
Redundant Power Supply	Yes
Operating Temperature	32 to 104°F (0 to 40°C)
Ports	8 x 10 Gigabit Ethernet (SFP+)
Redundancy	N+1
Management	Web UI, CLI
Power Supply	AC
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 - 95% (noncondensing)