4-5
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Chapter 4 Installing the VDS Internet Streamer Software and Initially Configuring a CDE
Launching a New CDE for the First Time
Figure 4-3 CIMC Main Webpage
Configure Remote Presence
To get access to the serial port of CDE280, you have to configure the settings:
Step 7 Select Remote Presence from the left pane:
a. Select Virtual KVM and check the Enabled check box.
b. Set Max Sessions to 4.
c. Set Remote Port to 2068.
d. Click Save Changes.