4-28
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Chapter 4 Installing the VDS Internet Streamer Software and Initially Configuring a CDE
Re manufacturing a CDE
WARNING! This will erase everything on flash [n]: y
Read 4275200 byte rescue image file
................................. done.
Flash manufactured successfully.
UUID is: 53D19F64-D663-A017-8922-003048C377F2
Serial Number is last 10 of UUID: 3048C377F2
Date= '09/22/08'
Cookie installed successfully.
MODEL: CDE205
FLASH: found, directory validated
COOKIE: valid
IMAGE: NONE
FLASHDEV: /dev/hda
Installer Main Menu:
1. Configure Network
2. Manufacture flash
3. Install flash cookie
4. Install flash image from network
5. Install flash image from cdrom
6. Install flash image from disk
7. Wipe out disks and install .bin image
8. Exit (and reboot)
9. Force manufacturing flash
Choice [0]:
Step 4 Choose Option 5 to install the flash image from the CD-ROM drive. You should see something like this:
Please select an image from the following list:
1. CDS23.sysimg
2. Return to Main Menu
Image [1]:
Step 5 Choose Sub-option 1 to select an image and enter Y when prompted to confirm and proceed with the
flash write. You should see something like this:
Installing CDS23.sysimg
Read 34243584 byte image file
Existing version in flash: NONE
New version to install: 2.3.1.2
Proceed with flash write? [y]:
..........................................................................................
.................................................................................... done.
Image was successfully written to flash.
MODEL: CDE205
FLASH: found, directory validated
COOKIE: valid
IMAGE: 2.3.1.2
FLASHDEV: /dev/hda
Installer Main Menu:
1. Configure Network
2. Manufacture flash
3. Install flash cookie
4. Install flash image from network
5. Install flash image from cdrom
6. Install flash image from disk
7. Wipe out disks and install .bin image
8. Exit (and reboot)
To Next Page
Loading...
Need help?
General
