E-2
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Appendix E Configuring VDS-IS CDE280 Disks
Changing the Disk Status Using KVM Console
Figure E-1 MegaRAID Configuration Utility
Step 9
On successful completion, the MegaRAID configuration utility is loaded and the Virtual Drive
Management window displays the No Configuration Present message under Cisco 12G SAS Modular
Raid(Bus 0x04, Dev 0x00). All the 24 new disks that are added are listed under Controller.
Figure E-2 Loading MegaRAID Configuration Utility
Step 10
Select Cisco 12G SAS Modular Raid(Bus 0x04, Dev 0x00) and press F2 to change the disk status from
JBOD to Online.
Step 11 Choose Make Unconfigured Good from the drop-down list and press Enter.
To Next Page
Loading...
