E-8
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Appendix E Configuring VDS-IS CDE280 Disks
Changing the Disk Status Using KVM Console
Step 21 To verify the status of the virtual drive status, choose Storage > Cisco 12G SAS Modular Raid
Controller (SLOT-HBA) > Virtual Drive Info.
The Virtual Drives area displays the following status:
• Status—Optimal
• Health—Good
• RAID Level—RAID 0
Figure E-10 Virtual Drive Info Status
To Next Page
Loading...
