Cisco CRS-1 - Carrier Routing System Router Troubleshooting Guide

1-8
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 1 General Troubleshooting
Basic Cisco IOS XR Verification and Troubleshooting Tools
DESCRIPTION
To display information about the active lines on the router, use the show
users command in EXEC mode.
show users
SYNTAX DESCRIPTION
This command has no arguments or keywords.
DEFAULTS
No default behavior or values
COMMAND MODES
EXEC
COMMAND HISTORY
Release
Modification
Release 2.0
This command was introduced on the Cisco CRS-1.
Release 3.0
No modification.
Release 3.2
This command was first supported on the Cisco XR 12000 Series Router.
USAGE GUIDELINES
To use this command, you must be in a user group associated with a task group
that includes the proper task IDs. For detailed information about user groups
and task IDs, see the Configuring AAA Services on Cisco IOS XR Software
module of the Cisco IOS XR System Security Configuration Guide.
Use the show users command to display the line number, connection name, idle
time, hosts, and terminal location. An asterisk (*) indicates the current
terminal session.
EXAMPLES
The following is sample output identifying an active vty terminal session:
* * * * * * * * * * * * * * * * START OF LISTING * * * * * * * * * * * * * * * *
RP/0/RP0/CPU0:router# show users
* * * * * * * * * * * * * * * * END OF LISTING * * * * * * * * * * * * * * * *
Line User Service Conns Idle Location
con0_RP0_CPU0 cisco hardware 0 18:33:48
vty0 cisco telnet 0 00:30:36 10.33.54.132
* vty1 cisco telnet 0 00:00:00 10.33.54.132
* * * * * * * * * * * * * * * * END OF LISTING * * * * * * * * * * * * * * * *
Table 89 describes the significant fields shown in the display.

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English