1-21
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 1 General Troubleshooting
Verifying the System
1804 2496
0/SM2/*
host 1762 2496 3285
1804 2496
0/SM3/*
host 1776 2496 3285
1790 2470
LED Information
---------------------------------------------
0/1/*: Module (host) LED status says: OK
0/1/*: Module (jacket) LED status says: OK
0/1/*: Module (spa0) LED status says: OK
0/1/*: Module (spa5) LED status says: OK
0/6/*: Module (host) LED status says: OK
0/6/*: Module (jacket) LED status says: OK
0/6/*: Module (spa0) LED status says: OK
0/6/*: Module (spa4) LED status says: OK
0/6/*: Module (spa5) LED status says: OK
0/RP0/*: Module (host) LED status says: OK
0/RP0/*: Alarm LED status says: NONE
Rack 0: Upper Fan Tray: LED status : OK
Rack 0: Lower Fan Tray: LED status : OK
0/RP1/*: Module (host) LED status says: OK
0/RP1/*: Alarm LED status says: NONE
0/SM0/*: Module (host) LED status says: OK
0/SM1/*: Module (host) LED status says: OK
0/SM2/*: Module (host) LED status says: OK
0/SM3/*: Module (host) LED status says: OK
Fan Information
---------------------------------------------
Fan speed (rpm):
FAN1 FAN2 FAN3 FAN4
Rack 0:
Upper 4842 4882 4842 4882
Lower 4882 4842 4923 4842
Power Supply Information
---------------------------------------------
Power-Supply Voltage Current
(V) (A)
Zone 1: [A], [B] 54.867, 54.377 4.596, 4.387
Zone 2: [A], [B] 54.573, 53.985 6.894, 5.745
Zone 3: [A], [B] 55.161, 54.279 4.387, 4.491
Total Current: 30.500 A
Total Power : 1677.500 W
The example output shows the system environmental monitor parameter variables.
The output from the show context command displays core dump context information. See the “show
context Command” section on page 1-11 for more information on the show context command output.
RP/0/RP0/CPU0:router# show context
node: node0_1_CPU0
------------------------------------------------------------------
Crashed pid = 61524 (pkg/bin/tcam_mgr)
To Next Page
Loading...
Need help?
General
