Cisco CRS-1 - Carrier Routing System Router Troubleshooting Guide

1-25
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 1 General Troubleshooting
Verifying the System
delay trigger line 100
clock source internal
!
controller SONET0/6/0/1
clock source internal
!
controller SONET0/6/4/4
clock source internal
!
controller SONET0/6/4/5
clock source internal
!
controller SONET0/6/4/6
clock source internal
!
controller SONET0/6/4/7
clock source internal
!
router static
address-family ipv4 unicast
0.0.0.0/0 172.16.52.1
!
!
ssh server
end
The example output displays the contents of the current running configuration.
The show system verify start command starts the system verification process and the show system
verify report generates the output from the system verification process. The output allows you to verify
that the system parameters are as expected.
RP/0/RP0/CPU0:router# show system verify start
Storing initial router status ...
done.
RP/0/RP0/CPU0:router#
RP/0/RP0/CPU0:router# show system verify report
Getting current router status ...
System Verification Report
==========================
- Verifying Memory Usage
- Verified Memory Usage : [OK]
- Verifying CPU Usage
- Verified CPU Usage : [OK]
- Verifying Blocked Processes
- Verified Blocked Processes : [OK]
- Verifying Aborted Processes
- Verified Aborted Processes : [OK]
- Verifying Crashed Processes
- Verified Crashed Processes : [OK]
- Verifying LC Status
- Verified LC Status : [OK]
- Verifying QNET Status
Unable to get current LC status info
- Verified QNET Status : [FAIL]
- Verifying GSP Fabric Status
- Verified GSP Fabric Status : [OK]
- Verifying GSP Ethernet Status

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English