Cisco CRS-1 - Carrier Routing System Router Troubleshooting Guide

1-34
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 1 General Troubleshooting
Validating and Troubleshooting Cisco IOS XR Software Package Installation
set. The show install committed command is useful to ensure software is installed and committed after
a router reload. If the expected software is not installed and committed, see Cisco IOS XR Getting
Started Guide for the Cisco CRS-1 Router for information on installing and committing
Cisco IOS XR software packages.
The following command output shows the committed software packages on all card in the router.
RP/0/RP0/CPU0:router# show install committed
Secure Domain Router: Owner
Node 0/1/SP [SP] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
Node 0/1/CPU0 [LC] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/lc/mbihfr-lc.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
Node 0/6/SP [SP] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
Node 0/6/CPU0 [LC] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/lc/mbihfr-lc.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
Node 0/RP0/CPU0 [RP] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/mbihfr-rp.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
Node 0/RP1/CPU0 [RP] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/mbihfr-rp.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
Node 0/SM0/SP [SP] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
Node 0/SM1/SP [SP] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
Node 0/SM2/SP [SP] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
Node 0/SM3/SP [SP] [SDR: Owner]
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Committed Packages:
disk0:comp-hfr-mini-3.3.0
The active packages for each node are on disk0, and for all nodes, the composite package
hfr-os-mbi-3.3.0 is active.

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English