Cisco CRS-1 - Carrier Routing System Router Troubleshooting Guide

1-41
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 1 General Troubleshooting
Validating and Troubleshooting Cisco IOS XR Software Configuration
class-map match-any 11g
match mpls experimental topmost 5
match precedence critical
!
class-map match-any default
match any
!
class-map match-any business
match mpls experimental topmost 5
match precedence flash
!
policy-map fabric-qos
class 11g
priority
!
class business
bandwidth remaining percent 65
!
class default
bandwidth remaining percent 35
!
!
interface Loopback0
ipv4 address 10.1.1.1 255.255.255.255
!
interface MgmtEth0/RP0/CPU0/0
description Connected to router LAN
ipv4 address 192.0.2.70 255.255.255.0
!
.
.
.
!
interface POS0/6/0/3
shutdown
!
interface POS0/6/4/0
shutdown
!
interface POS0/6/4/1
The output is used to determine if the configuration is as expected.
In the following example, the path to SysDB where the configuration is stored in the database is
displayed.
RP/0/RP0/CPU0:router(config)# describe hostname router
The command is defined in shellutil.parser
Node 0/RP0/CPU0 has file shellutil.parser for boot package /disk0/hfr-os-mbi-3.3
.0/mbihfr-rp.vm from hfr-base
Package:
hfr-base
hfr-base V3.3.0[2I] Base Package
Vendor : Cisco Systems
Desc : Base Package
Build : Built on Mon May 1 06:27:09 UTC 2006
Source : By edde-bld1 in /vws/3.3.0./file for
c2.95.3-p8
Card(s): RP, DRP, DRPSC, OC3-POS-4, OC12-POS, GE-3, OC12-POS-4, OC48-POS
, E3-OC48-POS, E3-OC12-POS-4, E3-OC3-POS-16, E3-OC3-POS-8, E3-OC3-POS-4, E3-OC48
-CH, E3-OC12-CH-4, E3-OC3-CH-16, E3-GE-4, E3-OC3-ATM-4, E3-OC12-ATM-4, E5-CEC, L
C, SP

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English