Cisco E20 - Page 22

www.cisco.com
22
Cisco IP Video Phone E20 Administrator guide
D143 30.12 Administrator guide Cisco IP Video Phone E20, TE4.1 November 2011.
All contents are Copyright © 2010–2011, Cisco Systems, Inc. All rights reserved.
System information
This is an information panel only, providing information such as
• System name
• Uptime
• Network IP address
• SIP address
• SIP proxy address
• SIP status
• E20 software version
• Hardware Module serial number
• MAC address
When in a call more information is also provided, such as:
• Remote URI
• Call rate
• Protocol
• Video protocol
• Video resolution
• Video channel rate
• Video Packet loss (in numbers and
in %)
• Video Jitter
• Audio protocol
• Audio Channel rate
• Audio Packet loss (in numbers and
in %)
• Audio jitter
• Encryption type
• Encryption status
This information has been split into two pages. Use softkeys to swap pages.
Startup wizard
The Startup wizard is dealt with in “Deploying the E20” on page 6.
Reboot
Selecting and pressing Reboot will cause the E20 to restart in an orderly
manner.
Advanced settings
The Advanced settings are described in detail in the next chapter.