Cisco EX Series User Manual

Configuration using the Touch controller
Waking up the system
If no menu is displayed on the Touch controller, tap the display
to wake up the system.
If the system does not wake up:
• Make sure the Touch controller is connected to the main unit.
• Make sure the main unit is connected to power and
switched on.
If the system has just been switched on, wait a few minutes to
allow the system to start up.
If in doubt, read the installation guide for your product.
Touch controller
Back to task overview
Cisco TelePresence Video Systems
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
12
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Configuration

Cisco EX Series Specifications

General

Dimensions	Varies by model
Weight	Varies by model
Audio Features	Acoustic echo cancellation
Microphones	Built-in beamforming microphone array
Display Support	Dual display support
Connectivity	HDMI, USB, Ethernet, Wi-Fi
Protocols	SIP, H.323
Security	Secure boot
Compatibility	Cisco Webex
Power Source	AC power adapter
Video Resolution	Up to 4K UHD