Cisco VCS provisioning
When using the Cisco VCS (Video Communication Server)
provisioning, a template containing all the settings that can be
provisioned must be uploaded to Cisco TMS (TelePresence
Management System). This is called the Cisco TMS provision-
ing configuration template.
All the advanced settings for your video system are included
in this template. All settings except SystemUnit Name and
SIP Profile [1..1] URI can be automatically provisioned to the
video system.
The advanced settings are described in the administrator
guide for your video system. Examples showing either the
default value or an example value are included.
Read the Cisco TMS Provisioning Deployment Guide to find
out how to upload the file to Cisco TMS, and how to set the
desired values for the parameters to be provisioned. If not
set by Cisco TMS, the default values are used.
Downloading the provisioning configuration
template
You can download the templates here:
C Series:C Series Release Notes
EX Series: EX Series Release Notes
MX Series: MX Series Release Notes
Profile Series: Profile Series Release Notes
SX Series:SX Series Release Notes
For each software release there is one provisioning configu-
ration template for every video system model. Make sure to
download the correct file.
Cisco TelePresence Video Systems
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
44
Getting Started Guide