Provisioning set-up
(When using a provisioning system)
If your system is automatically provisioned, the IP and provi-
sioning settings are automatically configured. To keep the
automatic settings, skip these stages on the Setup assistant.
Start the Setup assistant
Navigate to the user name in the upper left corner, and select
Settings. Select Setup assistant. Navigate to Provisioning by
selecting Next.
NOTE: When you start up the SX10 for the first time, the
Setup assistant starts automatically.
Choose provisioning infrastructure
Choose one of the following supported provisioning systems:
• CUCM (Cisco Unified Communications Manager)
• CUCM via Expressway
• VCS (Video Communication Server)
* The DHCP server can be set up to provide the Host server address
automatically (DHCP Option 150). Any input set up here overrides the
setting provided by DHCP.
CUCM
Contact your UCM administrator to get the information needed.
Enter IP address or DNS name in the Host server address field,
and select ⎷ to confirm the change*. Select Apply to save.
You can find more details about setting up Cisco UCM provi-
sioning in the Administering TC endpoints on CUCM guide.
CUCM via Expressway
Contact your UCM administrator to get the information needed.
Enter Username, Password and Domain in the corresponding
input fields. Always select ⎷ to confirm the changes. Select
Apply to save.
In some cases, you must manually enter the Expressway
address. Select Manually override Expressway address, and
enter the address you have received upon ordering in the
Host Server Address field.
VCS
Contact your VCS provider to get the information needed.
1.
Enter IP address or DNS name of the Cisco VCS and
select ⎷ to confirm the change.
2.
Enter the Username, and Password, if required, for
authenticating the video system with the provisioning
server. Select ⎷ to confirm the change
3. Enter SIP Domain and select ⎷ to confirm the change.
4. Select Apply to save the changes.
Have a look at the Cisco VCS provisioning appendix for
more information on VCS provisioning.
Back to task overview
Cisco TelePresence Video Systems
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
31
Getting Started Guide
To Next Page
Loading...
Need help?
General
