Setting the system/codec password
You need a user name and a password to sign in to the web
and command line interfaces of your system. You also need
the system password to access the administrator settings on
the Touch controller.
The video conference system is delivered with a default user
account with the user name admin and no password set. This
user has full access rights to the system.
A warning on the screen of your video system indicates if no
administrator password is set. To remove the warning, you must
set an administrator password.
NOTE: We strongly recommend that you set a password for the
admin user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe place. You
have to contact your Cisco representative, if you have forgot-
ten the password.
1.
Click your user name in the upper right corner, and select
Change password.
2.
Enter the Current password, the New password, and repeat
the new password in the corresponding input fields.
The password format is a string with 0–64 characters.
If a password is not currently set, use a blank Current
password.
3. Click Change password.
Back to task overview
Setting the menu password
Initially, no menu password is set to restrict access to the
Administrator menu on the on-screen menu. After you set up
a menu password, you need to enter it to configure the video
system, when using a remote control.
The Administrator Settings menu password cannot be set using
the Touch controller.
NOTE: We strongly recommend that you define a password to
protect the Administrator Settings menu, because these settings
affect the behavior of the video conference system.
1.
Go to the Configuration tab and select System Configuration.
2.
Click the text Set Administrator Settings menu password in
the upper right corner.
3. Enter the menu password in the Password field.
4. Click Save to confirm the change.
5.
The link text in the upper right corner should now say
Change Administrator Settings menu password.
Cisco TelePresence Video Systems
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
28
Getting Started Guide
To Next Page
Loading...
Need help?
General
