Contents
xxxi
Cisco Security Appliance Command Line Configuration Guide
OL-10088-01
APPENDIX
C Using the Command-Line Interface C-1
Firewall Mode and Security Context Mode C-1
Command Modes and Prompts C-2
Syntax Formatting C-3
Abbreviating Commands C-3
Command-Line Editing C-3
Command Completion C-4
Command Help C-4
Filtering show Command Output C-4
Command Output Paging C-5
Adding Comments C-6
Text Configuration Files C-6
How Commands Correspond with Lines in the Text File C-6
Command-Specific Configuration Mode Commands C-6
Automatic Text Entries C-7
Line Order C-7
Commands Not Included in the Text Configuration C-7
Passwords C-7
Multiple Security Context Files C-7
APPENDIX
D Addresses, Protocols, and Ports D-1
IPv4 Addresses and Subnet Masks D-1
Classes D-1
Private Networks D-2
Subnet Masks D-2
Determining the Subnet Mask D-3
Determining the Address to Use with the Subnet Mask D-3
IPv6 Addresses D-5
IPv6 Address Format D-5
IPv6 Address Types D-6
Unicast Addresses D-6
Multicast Address D-8
Anycast Address D-9
Required Addresses D-10
IPv6 Address Prefixes D-10
Protocols and Applications D-11
TCP and UDP Ports D-11
To Next Page
Loading...
