B-14
Cisco Security Appliance Command Line Configuration Guide
OL-10088-01
Appendix B Sample Configurations
Example 4: Multiple Mode, Transparent Firewall with Outside Access
no shutdown
interface gigabitethernet 0/0.150
vlan 150
no shutdown
interface gigabitethernet 0/0.151
vlan 151
no shutdown
interface gigabitethernet 0/0.152
vlan 152
no shutdown
interface gigabitethernet 0/0.153
vlan 153
no shutdown
interface gigabitethernet 0/1
shutdown
interface gigabitethernet 0/1.4
vlan 4
no shutdown
interface gigabitethernet 0/1.5
vlan 5
no shutdown
interface gigabitethernet 0/1.6
vlan 6
no shutdown
interface gigabitethernet 0/1.7
vlan 7
no shutdown
interface management 0/0
no shutdown
context admin
allocate-interface gigabitethernet 0/0.150
allocate-interface gigabitethernet 0/1.4
allocate-interface management 0/0
config-url disk0://admin.cfg
context customerA
description This is the context for customer A
allocate-interface gigabitethernet 0/0.151
allocate-interface gigabitethernet 0/1.5
config-url disk0://contexta.cfg
context customerB
description This is the context for customer B
allocate-interface gigabitethernet 0/0.152
allocate-interface gigabitethernet 0/1.6
config-url disk0://contextb.cfg
context customerC
description This is the context for customer C
allocate-interface gigabitethernet 0/0.153
allocate-interface gigabitethernet 0/1.7
config-url disk0://contextc.cfg
Example 4: Admin Context Configuration
The host at 10.1.1.75 can access the context using SSH, which requires a key pair to be generated using
the crypto key generate command.
hostname Admin
domain isp
interface gigabitethernet 0/0.150
nameif outside
security-level 0
no shutdown
To Next Page
Loading...
