Cisco FirePOWER ASA 5500 series

30-79
Cisco Security Appliance Command Line Configuration Guide
OL-10088-01
Chapter 30 Configuring Tunnel Groups, Group Policies, and Users
Configuring User Attributes
Specifying the User Home Page
To specify a URL for the web page that displays when this WebVPN user logs in, enter the homepage
command in username webvpn configuration mode. To remove a configured home page, including a null
value created by issuing the homepage none command, enter the no form of this command. The no
option allows inheritance of a value from the group policy. To prevent inheriting a home page, enter the
homepage none command.
The none keyword indicates that there is no WebVPN home page. It sets a null value, thereby
disallowing a home page and prevents inheriting a home page.
The url-string variable following the keyword value provides a URL for the home page. The string must
begin with either http:// or https://.
There is no default home page.
hostname(config-username-webvpn)# homepage {value url-string | none}
hostname(config-username-webvpn)# no homepage
hostname(config-username-webvpn)#
The following example shows how to specify www.example.com as the home page for the user named
anyuser:
hostname(config)# username anyuser attributes
hostname(config-username)# webvpn
hostname(config-username-webvpn)# homepage value www.example.com
hostname(config-username-webvpn)#
Applying Customization
Customizations determine the appearance of the windows that the user sees upon login. You configure
the customization parameters as part of configuring WebVPN. To apply a previously defined web-page
customization to change the look-and-feel of the web page that the user sees at login, enter the
customization command in username webvpn configuration mode:
hostname(config-username-webvpn)# customization {none | value customization_name}
hostname(config-username-webvpn)#
For example, to use the customization named blueborder, enter the following command:
hostname(config-username-webvpn)# customization value blueborder
hostname(config-username-webvpn)#
You configure the customization itself by entering the customization command in WebVPN mode.
The following example shows a command sequence that first establishes a WebVPN customization
named 123 that defines a password prompt. The example then defines a WebVPN tunnel-group named
test and uses the customization command to specifies the use of the WebVPN customization named 123:
hostname(config)# webvpn
hostname(config-webvpn)# customization 123
hostname(config-webvpn-custom)# password-prompt Enter password
hostname(config-webvpn)# exit
hostname(config)# username testuser nopassword
hostname(config)# username testuser attributes
hostname(config-username-webvpn)# webvpn
hostname(config-username-webvpn)# customization value 123
hostname(config-username-webvpn)#