Cisco IE-3000-8TC

14-5
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Chapter 14 Configuring Smartports Macros
Displaying Smartports Macros
Displaying Smartports Macros
To display the Smartports macros, use one or more of the privileged EXEC commands in Table 14-2.
Ta b l e 14-2 Commands for Displaying Smartports Macros
Command Purpose
show parser macro Displays all Smartports macros.
show parser macro name macro-name Displays a specific Smartports macro.
show parser macro brief Displays the Smartports macro names.
show parser macro description [interface
interface-id]
Displays the Smartports macro description for all interfaces or for a
specified interface.