Cisco IE-3000-8TC User Manual

Contents
v
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
CHAPTER 4 Assigning the Switch IP Address and Default Gateway 4-1
Understanding the Boot Process 4-1
Assigning Switch Information 4-2
Default Switch Information 4-3
Understanding DHCP-Based Autoconfiguration 4-3
DHCP Client Request Process 4-4
Understanding DHCP-based Autoconfiguration and Image Update 4-5
DHCP Autoconfiguration 4-5
DHCP Auto-Image Update 4-5
Limitations and Restrictions 4-5
Configuring DHCP-Based Autoconfiguration 4-6
DHCP Server Configuration Guidelines 4-6
Configuring the TFTP Server 4-7
Configuring the DNS 4-7
Configuring the Relay Device 4-8
Obtaining Configuration Files 4-8
Example Configuration 4-9
Configuring the DHCP Auto Configuration and Image Update Features 4-11
Configuring DHCP Autoconfiguration (Only Configuration File) 4-11
Configuring DHCP Auto-Image Update (Configuration File and Image) 4-12
Configuring the Client 4-13
Manually Assigning IP Information 4-14
Checking and Saving the Running Configuration 4-14
Modifying the Startup Configuration 4-15
Default Boot Configuration 4-16
Automatically Downloading a Configuration File 4-16
Specifying the Filename to Read and Write the System Configuration 4-16
Booting Manually 4-17
Booting a Specific Software Image 4-18
Controlling Environment Variables 4-18
Scheduling a Reload of the Software Image 4-20
Configuring a Scheduled Reload 4-20
Displaying Scheduled Reload Information 4-21
CHAPTER 5 Configuring Cisco EnergyWise 5-1
Managing Single Entities 5-1
EnergyWise Entity 5-1
EnergyWise Domain 5-2
EnergyWise Network 5-2

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes