Cisco IE-3000-8TC - Page 839

Index
IN-7
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
configuration files (continued)
replacing a running configuration B-19, B-20
rolling back a running configuration B-19, B-20
specifying the filename 4-16
system contact and location information 33-16
types and location B-9
uploading
preparing B-10, B-13, B-16
reasons for B-8
using FTP B-14
using RCP B-18
using TFTP B-11
configuration guidelines
REP 21-7
configuration logger 32-10
configuration logging 2-5
configuration replacement B-19
configuration rollback B-19
configuration settings, saving 4-14
configure terminal command 13-6
configuring port-based authentication violation
modes
12-32
configuring small-frame arrival rate 26-5
config-vlan mode 2-2, 15-6
conflicts, configuration 39-7
connections, secure remote 11-33
connectivity problems 39-8, 39-10, 39-11
consistency checks in VTP Version 2 16-4
console port, connecting to 2-10
control protocol, IP SLAs 35-3
convergence
REP 21-4
corrupted software, recovery steps with Xmodem 39-2
CoS
in Layer 2 frames 36-2
override priority 17-6
trust priority 17-6
CoS input queue threshold map for QoS 36-14
CoS output queue threshold map for QoS 36-17
CoS-to-DSCP map for QoS 36-51
counters, clearing interface 13-19
CPU utilization, troubleshooting 39-18
crashinfo file 39-17
critical authentication, IEEE 802.1x 12-45
cryptographic software image
SSH 11-33
SSL 11-37
D
DACL
See downloadable ACL
daylight saving time 8-13
debugging
enabling all system diagnostics 39-15
enabling for a specific feature 39-14
redirecting error message output 39-15
using commands 39-14
default alarm configuration 3-4
default commands 2-4
default configuration
802.1x 12-27
auto-QoS 36-19
banners 8-17
booting 4-16
CDP 28-2
DHCP 23-6
DHCP option 82 23-7
DHCP snooping 23-7
DHCP snooping binding database 23-7
DNS 8-16
dynamic ARP inspection 24-5
EtherChannel 38-9
Ethernet interfaces 13-10
Flex Links 22-8
IGMP filtering 25-24
IGMP snooping 25-6
IGMP throttling 25-24